4DZG - CHARACTERIZATION OF LMDPE/LLDPE BLENDS FOR GEOMEMBRANE APPLICATION

4EJR - MECHANICAL PROPERTIES EVALUATION OF SOLVENT-FREE POLY(-CAPROLACTONE)/45S5 BIOGLASS COMPOSITES PROCESSED FROM MOLTEN STATE

4EHJ - THERMO-MECHANICAL BEHAVIOR AND RECYCLABILITY OF PA6 TOUGHENED WITH PP/PE COPOLYMER FOR CIRCULAR APPLICATIONS

4EQB - CHEMICAL RECYCLING OF CF/PA6 COMPOSITES: RECOVERY AND CHARACTERIZATION OF FIBERS AND MATRIX

4E2D - POLYPROPYLENE AND SUSTAINABLE YELLOW PIGMENT BASED COMPOSITES

4ENV - DEVELOPMENT OF THERMO-PRESSED POLYETHERSULFONE/ATTAPULGITE MEMBRANES: EVALUATION OF STRUCTURE AND PERFORMANCE FOR GAS SEPARATION

4E4W - CHARACTERIZATION OF POLYMER RESIN COMPOSITE WITHFIBERGLASS AND POLYCARBONATE MICROFIBERS FORAPPLICATIONS IN SMALL-SCALE BOAT MODELS

4ECP - LAMINATED COMPOSITE BIOINSPIRED ON THE MESOCARP OF BRAZILIAN NUT

4EK4 - ECO-FRIENDLY PLA BIOCOMPOSITES WITH AMAZONIAN CUPUAÇU HUSK RESIDUE

4EFY - TITLE: TOUGHENING OF POLYAMIDE 6 WITH HIGH-ETHYLENE CONTENT PP/PE COPOLYMERS

4EHQ - PBS BIOCOMPOSITES REINFORCED WITH PITOMBA BARK

4EK2 - BIODEGRADABLE AGRICULTURAL FILM BASED ON THERMOPLASTIC STARCH AND EGGSHELL

4DYK - NEW CHITOSAN/PVA FILMS WITH AgNPs SYNTHESIZED IN BETALAIN EXTRACT FOR IMPROVED FOOD PRESERVATION

4EHG - CHARACTERIZATION BY UV-VIS, PL, AND SEM OF PVA, CHITOSAN, PVA/CHITOSAN FILMS MODIFIED WITH SCHIFF BASE FOR CHROMIUM ION ADSORPTION

4E2Y - MECHANICAL AND THERMAL BEHAVIOR OF ACRYLONITRILE-STYRENE-ACRYLATE (ASA)/SHORT CARBON FIBER

4EH6 - THERMAL RECYCLING OF CF/PEEK COMPOSITES: REUSE OF RECYCLED CARBON FIBERS IN ASA-BASED FILAMENTS FOR 3D PRINTING

4EDJ - ORGANOMETALLIC-DRIVEN REGENERATION OF MARINE-DEGRADED PET AND PA6

4EGH - MECHANICAL PROPERTIES OF A COMMERCIAL PLA/PBAT BLEND INCORPORATED WITH PEA PROTEIN ISOLATE

4EHR - DEVELOPMENT OF A COMPOSITE OF POLIMERIC MATRIX REINFOIRCED WITH COFFEE GROUNDS AND BIOCHAR

4DQF - BIODEGRADABLE VESSELS OBTAINED BY 3D PRINTING COATED OF NANOFIBERS FOR PHYTOSANITARY CONTROL

4EJT - SYNERGISTIC EFFECT OF TITANIUM DIOXIDE AND FEW-LAYER GRAPHENE ON THE UV-C PHOTOSTABILIZATION OF POLYPROPYLENE

4EGG - DEVELOPMENT OF CONTINUOUS DYEING PROCESSES WITH NATURAL DYES IN PLASMA TREATED FABRICS.

4EJH - EFFECT OF PVA ADDITION AND UV CROSSLINKING ON THE PROPERTIES OF BACTERIAL CELLULOSE FILMS

4EKW - ELECTRICAL AND THERMAL PERCOLATION OF CARBON NANOTUBES IN XLPE

4EAZ - IMPREGNATION OF POLY(L-LACTIC ACID)/LIGNIN COMPOSITES WITH BRAZILIAN GREEN PROPOLIS EXTRACT ASSISTED BY SUPERCRITICAL CO2

4EKM - MECHANICAL AND THERMAL PROPERTIES OF TERNARY BLENDS COMPOSED OF POLYLACTIC ACID (PLA), POLY(BUTYLENE ADIPATE-CO-TEREPHTHALATE) (PBAT) AND THERMOPLASTIC STARCH (TPS)

4EPH - ENHANCED MECHANICAL PROPERTIES OF RECYCLED POLYPROPYLENE COMPOSITES REINFORCED WITH PINE NUTSHELL FIBER

4EBS - SYNTATIC FOAM BIOINSPIRED ON THE MESOCARP OF BRASILIN NUT

4EMD - INFLUENCE OF ALKALINE AGING ON THE THERMAL STABILITY AND APPARENT INTERLAMINAR SHEAR STRENGTH OF GFRP/EPOXY/GRAPHENE BARS

4ED6 - Renewable adhesives from polysaccharides: synergy in thermoplastic blends of cationic and waxy starch

4EJ2 - PREPARATION AND CHARACTERIZATION OF POLYURETHANE FOAM COMPOSITES WITH CARBON BLACK AND HYBRIDS FOR ELECTROMAGNETIC SHIELDING

4EHN - RESIDUES IN TEXTILE LINING FOR CURTAINS

4EHM - RICE HUSK BIOCHAR FOR BLACKOUT CURTAINS

4E4T - COMPATIBILIZING EFFECT IN THE LIFE CYCLE EXTENSION OF RECYCLED POLYMER BLENDS PRODUCED FROM POST-CONSUMER MULTILAYER PACKAGING FILMS

4EJJ - Characterization of k-carrageenan-based blends for biodegradeble IPMC

4EN2 - Comparative Study of Virgin and Recycled Polypropylene with Carbon Black for Conductive Composite Applications

4DZH - PROCESSABILITY AND CHARACTERIZATION OF GRAPE STALK/PBAT COMPOSITES: A SUSTAINABLE SOLUTION FOR ECOFRIENDLY MATERIALS

4DZV - MECHANICAL AND RHEOLOGICAL CHARACTERIZATION OF RECYCLED HETEROPHASIC POLYPROPYLENE COPOLYMER COMPOSITES WITH SHORT GLASS FIBER REINFORCEMENT

4EGP - Rheological control of epoxy resin fraction in glass fiber towpreg manufacturing

4ECT - Use of malt bagasse fibers in the production of biodegradable babassu mesocarp starch trays

4E42 - RECOVERY AND REUSE OF DIATOMACEOUS EARTH (DE) IN THE PREPARATION OF PHBV/DE COMPOSITES

4E2P - PREPARATION AND ANALYSIS OF TPS/EVA BLENDS FOR COATING FILMS

4ETS - EVALUATION OF THE CRITICAL LENGTH OF COCONUT FIBER FOR ITS DECONSTRUCTION IN A CHEMICAL/MECHANICAL PROCESS

4DPQ - Carbon Black as an auxiliary in the anchoring of Sisal fiber in unsaturated polyester matrix composites

4EEW - Synthesis and incorporation of hollow aluminum oxide particles as additive in a polymeric matrix

4ENE - GRAPHENE OXIDE-REINFORCED BIODEGRADABLE STARCH–PECTIN FILMS WITH ENHANCED PROPERTIES

4ESZ - PREPARATION OF PLA/CNC NANCOMPOSITES AS A STRATEGY TO IMPROVE PLA FOAMABILITY

4DZM - Production of Cellulose Nanostructures from Direct Conversion of Eucalyptus Sawdust via TEMPO-Mediated Oxidation

4E4A - INVESTIGATION OF COMPOUNDS DERIVED FROM MANGANESE ORE TAILINGS AS REINFORCING AGENTS IN STARCH-BASED FILMS: IMPACTS ON MECHANICAL, OPTICAL, AND ANTIMICROBIAL PROPERTIES

4DYT - INFLUENCE OF CARBON NANOPARTICLE GEOMETRY AND TRIBLOCK COPOLYMER ON THE FRACTURE TOUGHNESS OF EPOXY NANOCOMPOSITES

4ENQ - INFLUENCE OF GRAPHENE OXIDE ON THE CURING PARAMETERS OF EPOXY NANOCOMPOSITES

4EMR - EFFECT OF COMMERCIAL VS. MESOPOROUS BIOACTIVE GLASSES ON THE PROPERTIES OF MELT-PROCESSED PLA BIOCOMPOSITES

4EG6 - A PROCESSING AND CHARACTERIZATION OF CARBON NANOTUBE BUCKYPAPER (BP) FOR APPLICATION IN THE AERONAUTICAL INDUSTRY.

4ECK - PRODUCTION OF CARBON FIBERS USING BIOMASS THROUGH THE LIPID BLOWING TECHNIQUE, SUPERSONIC SOLUTION BLOWING (SSB)

4DWR - APPLICATION OF FACTORIAL DESIGN FOR STRUCTURAL MODIFICATION OF BIO-BASED POLYURETHANE NANOCOMPOSITE MEMBRANES: EFFECTS ON SURFACE AREA AND POROSITY

4E22 - COMPARATIVE EVALUATION OF SYNTHESIS AND CHARACTERIZATION OF NANOCHITOSAN: A STUDY FOR ENVIRONMENTAL APPLICATION

4EBT - PLASMA FUNCTIONALIZATION OF CARBON-BASED NANOPARTICLES FOR IMPROVED DISPERSION AND ADHESION IN EPOXY ADHESIVES

4EYK - MODIFICATION OF HALLOYSITE WITH IONIC LIQUIDS FOR OBTAINING CASSAVA STARCH-BASED FILMS

4EFD - INFLUENCE OF ELECTROSPINNING PROCESS PARAMETERS ON THE CRISTALINITY OF PVDF/RGO NANOFIBERS

4DYD - ELECTROSPINNING PARAMETERS AND THEIR INFLUENCE ON NANOFIBER DIAMETER

4EVS - PVA NANOFIBERS CONTAINING GRAPHENE OXIDE, COATED WITH POLYPYRROLE FOR POTENTIAL APPLICATION IN ELECTRICAL DEVICES

4EVJ - INCORPORATION AND RELEASE OF COPAIBA OIL NANOENCAPSULATED WITH BACTERIAL NANOFIBRILLATED CELLULOSE

4EE2 - ADVANCES IN HYBRID NANOSTRUCTURED EPOXY NANOCOMPOSITES: INTERFACIAL ENGINEERING AND THERMO-MECHANICAL PERFORMANCE

4ESV - PURIFIED POST-CONSUMER SOYBEAN OIL AS AN ALTERNATIVE TO NAPHTHENIC OIL IN NATURAL RUBBER COMPOUND FORMULATIONS

4EVT - PREPARATION AND PROPERTIES OF GRAPHENE OXIDE/PAADDA NANOCOMPOSITE FILMS

4EQ6 - Development and Characterization of Gelatin/PEO/HPC ElectrospunNanofibers

4E2E - USE OF ZnO-DOPED HYDROGELS IN PHOTOCATALYSIS: A REVIEW

4DX6 - DEVELOPMENT OF HYBRID EPOXY COATINGS WITH POLYANILINE AND FUNCTIONALIZED SILICA FOR ANTICORROSIVE APPLICATIONS

4FES - PRODUCTION OF POLYETHYLENE NANOCOMPOSITES WITH ENHANCED BARRIER PROPERTIES FOR HYDROGEN STORAGE APPLICATIONS

4EKR - MALEIC ANHYDRIDE PLASMA-FUNCTIONALIZED CARBON NANOTUBES FOR THE ADSORPTION OF METHYLENE BLUE IN WATER

4EAS - PREPARATION OF A BIOCOMPOSITE WITH CELLULOSE NANOCRYSTALS AND MCM-41 FOR DRUG DELIVERY

4EKC - IN SITU INCORPORATION OF POLYANILINE INTO ELECTROSPUN PVC MEMBRANES FOR ELECTROLYTIC SENSORS: MORPHOLOGICAL, THERMAL, SURFACE AND ELECTRICAL CHARACTERIZATION

4ECB - OBTAINING AND CHARACTERIZING A THREE-PHASE COMPOSITE OF POLYVINYL ALCOHOL WITH PZT PARTICLES AND CARBON NANOTUBES FOR APPLICATION AS A SENSOR.

4EBF - ROLE OF GRAPHENE NANOPARTICLE DISPERSION ON THE CURE ANDMECHANICAL PROPERTIES OF A 3D PRINTING RESIN

4EDP - PHOTOCATALYTIC PVA/CHALCOGENIDE NANOFIBER COMPOSITE FOR FILTERING APPLICATIONS

4EAF - PRODUCTION OF ECO-STRAWS BASED ON BABASSU MESOCARP STARCH BIOPLASTIC REINFORCED WITH CELLULOSE NANOFIBER

4ECD - Applications of Biopolymer Derived from Expanded Clay Waste in the Controlled Release of Fertilizers and Adsorption of Heavy Metals

4FBY - NATURAL RUBBER NANOCOMPOSITES REINFORCED WITH LUFFA CYLINDRICA CELLULOSE NANOCRYSTALS EFFECT OF TESPT ON PROCESSING AND PROPERTIES

4DYF - THYMOL EMULSIFICATION WITH PLURONIC F127® AND PEAPROTEIN ISOLATE: COMPARISON BETWEEN ULTRASONICATIONAND HIGH-PRESSURE HOMOGENIZATION

4DXX - ECO-FRIENDLY PHOTOCATALYSTS BASED ON MICROFIBRILLATED CELLULOSE AND ZnO FOR RAPID DEGRADATION OF NORFLOXACIN

4DXA - TAILORING STARCH-BASED BIOPOLYMER FILMS WITH METHYLIMIDAZOLIUM GROUPS AND CELLULOSE MICROFIBRES

4EDC - POLY(GLOBALIDE) NANOPARTICLES BY THE MELT-EMULSIFICATION TECHNIQUE

4ETP - STUDY OF THE INFLUENCE OF CELLULOSE NANOFIBERS ON THE MECHANICAL PROPERTIES OF POLYMER COMPOSITES WITH UNSATURATED POLYESTER

4DZ4 - SYNTHESIS OF BIODEGRADABLE LIGNIN NANOPARTICLES FOR ENCAPSULATION OF THE FUNGICIDE CARBENDAZIM

4ERK - FROM MALT BAGASSE WASTE TO NANOCELLULOSE PRODUCTION: IMPACT OF ACID HYDROLYSIS ON COLLOIDAL CHARACTERISTICS

4FCV - OPTIMIZATION OF CELLULOSE MICRO/NANOFIBRILS FOR APPLICATIONS AS REINFORCEMENT IN PAPER TUBES

4E2F - GEOGRIDS BASED ON HIGH-DENSITY POLYETHYLENE/GRAPHENE POLYMER NANOCOMPOSITES

4EPJ - STUDY OF THE ETHANOL/NITRIC ACID COMBINATION IN THE REMEDIATION OF MANUFACTURING WASTE (POLYETHYLENE TEREPHTHALATE/POLYAMIDE (PET/PA))

4EES - BIODEGRADABILITY OF BACTERIAL CELLULOSE FILMS IN NATURAL SOIL FROM A SEMIARID CLIMATE

4DXZ - DEVELOPMENT OF ALTERNATIVE CHEMICAL RECYCLING ROUTES FOR MULTILAYER PACKAGING

4EDH - DEVELOPMENT OF SUSTAINABLE COMPOSITES VIA HOT-PRESS MOLDING USING INDUSTRIAL POLYESTER AND COTTON TEXTILE WASTE

4EDK - SUSTAINABLE ACOUSTIC AND THERMAL INSULATING MATERIALS OBTAINED FROM INDUSTRIAL TEXTILE RESIDUES

4DR6 - EFFECT OF BORON CONTENT ON WATER VAPOR PERMEABILITY OF POLY(VINYL ALCOHOL) FILMS

4DYZ - SWELLING BEHAVIOR AT DIFFERENT PH VALUES AND PHYSICOCHEMICAL CHARACTERIZATION OF CASHEW GUM-BASED HYDROGELS FOR AGRICULTURAL APPLICATIONS

4DYX - OBTENTION AND CHARACTERIZATION OF MEMBRANE BASED ON RECYCLED PET AND COCONUT ASH

4EET - COFFEE-BASED POLYMER COMPOSITES: A COMPARATIVE STUDY OF INJECTION AND AGGLUTINATION TECHNIQUES

4DW4 - REUSES OF RICE HUSK RESIDUES IN CELLULOSE EXTRACTION AND PROPARGYL-CELLULOSE SYNTHESIS

4EAB - BIOPOLYMERS FROM RENEWABLE SOURCES DERIVED FROM AÇAÍ SEEDS AND BROKEN RICE

4E2C - EVALUATION OF THE INFLUENCE OF ZEOLITE TYPE ON THERMAL DEGRADATION DURING PROCESS OF PLA

4EBA - RECYCLED COMPOSITES: USE OF CF/PEEK WASTE AS REINFORCEMENT FILLER FOR PHENOLIC RESIN

4EFR - DEVELOPMENT OF CORN STARCH FILMS: THE ROLE OF PLASTICIZERS, MONTMORILLONITE CLAY, AND TEA TREE ESSENTIAL OIL

4DYS - SUSTAINABLE MONOLITHS VIA CORN HUSK VALORIZATION: EXTRACTION, CHARACTERIZATION, AND TRANSFORMATION OF CELLULOSE INTO TRIACETATE

4DQR - PLASTIC AGRICULTURE WASTE MANAGEMENT WITH TENEBRIO MOLITOR LARVAE

4DYH - EVALUATION OF THE CORRELATION BETWEEN DIFFERENT DIMENSIONS OF COMPOSITE WASTE AND MECHANICAL PERFORMANCE IN RECYCLED THERMOPLASTIC COMPOSITES

4DM6 - EFFECTS OF MICRONIZED RUBBER INCORPORATION IN POLYURETHANE CONVENTIONAL FLEXIBLE FOAMS

4ENG - INSOLUBLE XANTHAN AS A PLATFORM FOR BIOREMEDIATION BY ADSORPTION – GASOLINE REMOVAL

4EQF - INSOLUBLE XANTHAN AS A PLATFORM FOR BIOREMEDIATION BY ADSORPTION – DYES REMOVAL

4EFF - SUSTAINABILITY IN AGRICULTURE: SYNTHESIS OF SUPERABSORBENT HYDROGELS FROM RENEWABLE MONOMERS

4DV6 - Effect of different crosslinkers on chitosan membranes properties for PTEs removal in water

4DX2 - EFFECT OF INTERNAL REACTOR REFLUX ON THE THERMAL PYROLYSIS OF POLYPROPYLENE

4DZY - STUDY OF ACCELERATED AGING IN POLYPROPYLENE FOR MICROPLASTIC MITIGATION IN MARINE ENVIRONMENT.

4EQ2 - DEVELOPMENT OF BIODEGRADABLE STARCH-BASED POLYMERIC FOAMS REINFORCED WITH CELLULOSE EXTRACTED FROM KOMBUCHA SCOBY.

4F2V - UTILIZATION OF SLUDGE FROM LOW-DENSITY POLYETHYLENE (LDPE) SCRAP RECYCLING PROCESS IN CERAMIC BRICK MANUFACTURING

4EJV - TACKING IMPACT INDICATORS OF GLYCEROL-PLASTICIZED GELATIN BIOPLASTICS PRODUCED FROM CATTLE WASTE

4EGB - LIFE CYCLE ASSESSMENT OF FLEXIBLE ORGANIC SOLAR CELLS SUPPORTED ONTO BIOBASED POLYESTERS

4EHK - STRUCTURAL EFFECTS ON THE ENVIRONMENTAL DEGRADATION OF LOW-DENSITY POLYETHYLENE (LDPE)

4EE6 - MECHANICAL RECYCLING OF MULTILAYER FLEXIBLE PACKAGING EMPLOYING MALEIC ANHYDRIDE AS COMPATIBILIZER

4EED - STUDY OF ALTERNATIVE PACKAGING WITH LOWER ENVIROMENTAL IMPACT FOR FRESH YEAST

4EKP - SUSTAINABLE POTENTIAL OF Poraqueiba paraensis SEED STARCH AS A POLYMERIC MATRIX IN BIODEGRADABLE SYSTEMS

4DRV - LIFE CYCLE ASSESSMENT OF SECONDARY COSMETIC PACKAGING: A COMPARATIVE STUDY OF PET, PET-PCR AND MOLDED PULP TRAYS

4EJG - ENVIRONMENTAL ANALYSIS OF HEAT SEALABLE PAPER PACKAGING BASED ON NANOFIBRILLATED CELLULOSE/STARCH NANOCOMPOSITES

4EPA - ENVIRONMENTAL COMPARISON BETWEEN CELLULOSE NANOCRYSTAL-REINFORCED STARCH PLASTICS AND LOW-DENSITY POLYETHYLENES AS FOOD PACKAGING MATERIALS

4F66 - MORPHOLOGICAL STRUCTURE OF RECYCLED POLYSTYRENE TOUGHENED WITH WASTE TIRES RUBBER

4DPA - ANTIMICROBIAL BEHAVIOR OF SIMVASTATIN-LOADED SOLUTION BLOW SPUN POLYLACTIC ACID/POLYETHYLENE OXIDE/HYDROXYAPATITE SCAFFOLDS

4EKN - DEVELOPMENT OF LIGNIN NANOPARTICLES FOR CURCUMIN DELIVERY WITH ENHANCED SOLUBILITY

4EYF - DEVELOPMENT OF POLYMERIC NANOMICELLS WITH NATURAL ACTIVE INGREDIENTS FOR COSMETIC APPLICATIONS: USE OF PEG-RICINO AS A SUSTAINABLE SURFACTANT

4EFJ - EVALUATION OF THE STABILITY AND MORPHOLOGY OF PLURONIC® F127-BASED POLYMERIC MICELLES LOADED WITH THERAPEUTIC AGENTS

4EDB - Additive Manufacturing of Natural Polymer-Based Scaffolds with Antimicrobial Properties for Bone Tissue Engineering

4EJN - APPLICATION OF ANTIBIOTIC-LOADED BONE CEMENT IN THE CONTROL OF ORTHOPEDIC INFECTIONS

4DNE - BIOCOMPATIBLE MICROENVIRONMENTS INSPIRED BY (PMMA/GELATIN)/HAP-ZINC SCAFFOLDS AS STRATEGIES FOR BONE REGENERATION

4DTQ - INTERACTION OF FIBROBLAST CELLS WITH SCAFFOLDS PRODUCED BY ADDITIVE MANUFACTURING CONTAINING SYNTHETIC/NATURAL POLYMER FOR APPLICATION IN MEDULLARY BONE REGENERATION

4EQY - COMPARATIVE ANALYSIS OF ELONGATION AT BREAK OF SILICONE ELASTOMER FROM BREAST IMPLANTS: EFFECTS OF SHEAR-INDUCED FATIGUE PRE-DEFORMATION

4EDX - Antimicrobial Polylactic Acid/Hydroxyapatite (PLA/HA) Biocomposite via Incorporation of Montmorillonite-Zinc Oxide Nanoparticle Nanocomposite (MMT-NPZnO)

4E4M - ENGINEERING BIOACTIVE 3D SCAFFOLDS: COMBINING PRECISION ARCHITECTURE AND SURFACE FUNCTIONALIZATION FOR TISSUE REGENERATION

4EMT - Modification of poly(ethylenimine) with amino acids and evaluation of its interaction with DNA for the formation of polyplexes for gene therapy applications.

4EAY - ADDITIVE MANUFACTURING OF A NOVEL BIOCOMPATIBLE POLYMER FOR IMPLANTABLE DRUG DELIVERY SYSTEMS

4EBZ - DEVELOPMENT OF STABLE CITRAL NANOEMULSIONS COATED WITH N-SUCCINYL CHITOSAN FOR SKIN WOUND THERAPY

4EMA - CATIONIZATION OF CASSAVA STARCH AND EVALUATION OF PHYSICOCHEMICAL AND BIOLOGICAL PROPERTIES

4DXQ - BIOFABRICATION OF POLYMERIC MATERIALS WITH BIOACTIVE MOLECULES FOR MODULATION OF CELL DIFFERENTIATION

4EQC - ONION-BASED FILMS MODIFIED BY OXYGEN PLASMA FOR USE IN WOUND TREATMENT AND CELL ADHESION

4EW6 - MODULATION OF PHYSICOCHEMICAL PROPERTIES OF CHITOSAN FILMS THROUGH ACIDIC SOLVENT SELECTION

4EAV - DEVELOPMENT OF FUNCTIONALIZED POLY(ε-CAPROLACTONE)/HYDROXYAPATITE SCAFFOLDS VIA ELECTROSPINNING 3D FOR ENHANCED BONE REGENERATION

4E2Q - Microneedle Production Using Additive Manufacturing From Biocompatible Methacrylates And Acrylate

4DXJ - POLYMERIC FILMS AS DRUG DELIVERY SYSTEM FOR MULTIDRUG OCULAR INSERTS

4DXW - POLYMERIC SYSTEMS AS MUCOADHESIVE TABLETS FOR DRUG DELIVERY WITH POTENTIAL USE IN THE TREATMENT OF HELICOBACTER PYLORI

4ECW - CASSAVA GUM HYDROGELS INCORPORATED WITH CARVACROL EXHIBIT ANTIMICROBIAL AND ANTIFUNGAL ACTIVITY

4FJY - POLYMERIC BIOMIMETIC NANOSYSTEMS FOR CANCER THERAPY: BIOLOGICAL AND IMMUNOMODULATORY PROPERTIES

4F4W - DEVELOPMENT OF A FILM-FORMING HYDROGEL BASED ON CELLULOSE AND CHITOSAN WITH TEA TREE ESSENTIAL OIL FOR THE TREATMENT OF ONYCHOMYCOSIS CAUSED BY DERMATOPHYTES AND YEASTS

4F6A - EVALUATION OF POLY-L-LACTIC ACID AND POLYCAPROLACTONE MICROPARTICLE ASSOCIATION FOR COLLAGEN SYNTHESIS IN VITRO

4DSE - PREPARATION, CHARACTERIZATION, AND COLLOIDAL PROPERTIES OF LIGNIN NANOPARTICLES DERIVED FROM SEQUENTIAL FRACTIONATION

4DSM - ENHANCED CARBOXIMETHYL CELLULOSE FILMS WITH CARNAUBA WAX AND SODIUM MOLYBDATE: A SUSTAINABLE APPROACH FOR AGRONOMIC APPLICATIONS

4EPY - HYDROXYPROPYL METHYLCELLULOSE FILMS WITH LIGNIN NANOPARTICLES AS UV BARRIER: EFFECT OF CONCENTRATION

4DXS - Synthesis of sustainable hydrogels with potential application for aqueous effluents treatment

4FDR - ENERGY TRANSFER BY FRET IN ORGANIC SYSTEMS: STUDY OF POLYMERS AND OLIGOMERS FOR OPTOELECTRONIC

4DNT - ULTRASOUND-MODIFIED POLYHIPE STRUCTURES FUNCTIONALIZED WITH PSS FOR ELECTROACTIVE AND BIOLOGICAL APPLICATIONS

4FDJ - INVESTIGATION OF SOLUBILITY PARAMETERS OF OXYALKYLATED LIGNIN FOR USE IN POLYURETHANE SYNTHESIS

4EB6 - ELECTROMAGNETIC ASSESSMENT OF POLYMERS FOR 24 GHZ RADAR RADOMES USING THE NRW METHOD

4E44 - SYNTHESIS AND CHARACTERIZATION OF MESOPOROUS SILICA NANOPARTICLES FUNCTIONALIZED WITH OFLOXACIN

4DTA - PREPARATION OF HYALURONIC ACID/PVP ORODISPERSIBLE FILMS: AN ALTERNATIVE FOR POST-WORKOUT SUPPLEMENTATION

4DPS - THERMAL STABILITY AND ABSORPTION PERFORMANCE OF Fe₃O₄@GO-HYDROGEL-BASED NANOCOMPOSITES FOR PARAQUAT REMOVAL FROM WATER

4E4K - DEVELOPMENT AND 3D PRINTING OF POROUS SUPPORTS OF PLA/ALUMINUM OXIDE COMPOSITE FOR IMMOBILIZATION OF CATALYTIC BIOMASS AIMING AT FRUCTOOLIGOSACCHARIDES PRODUCTION

4DS2 - EVALUATION OF THE REUSE OF BIOCATALYSTS OBTAINED FROM THE IMMOBILIZATION OF FUNGAL CELLS ON 3D SUPPORTS

4E62 - SYNTHESIS OF Fe₃O₄/POLY(HEMA-PEG₆MA-AI) NANOCOMPOSITE HYDROGELS FOR METHYLENE BLUE ADSORPTION

4DZP - INSIGHTS INTO STRUCTURAL FEATURES OF GLYCOSOLV COCONUT SHELL LIGNINS

4FFY - EVALUATION OF THE REMOVAL EFFICIENCY OF METHYLENE BLUE IN AQUEOUS MEDIUM USING PLASMA-TREATED COCONUT FIBER

4FGM - Development of Enhanced-Efficiency Fertilizer Using CNF and TPS for K and N nutrient Delivery

4E2T - DEVELOPMENT AND CHARACTERIZATION OF BETULINIC ACID-LOADED CELLULOSE AS A NOVEL THERAPEUTIC PLATFORM FOR LEISHMANIASIS

4FDT - EVALUATION OF COMPLEX COACERVATION AS A METHOD FOR ENCAPSULATION OF MACAUBA OIL USING CELLULOSE DERIVATIVES

4DT4 - WHEY PROTEIN ISOLATE-BASED FILMS WITH SURFACTANTS: POTENTIAL FOR ACTIVE PACKAGING WITH ANTIMICROBIAL ACTION

4E2J - PRODUCTION AND CHARACTERIZATION OF POLYACRILONITRILE (PAN) AEROGELS VIA ELECTROSPINNING AND CHEMICAL EXPANSION

4DQC - DEVELOPMENT OF CONTROLLED RELEASE FORMULATIONS OF THYME OIL EMPLOYING METHACRYLIC ACID COPOLYMERS AND THEIR GERMINATION EVALUATION IN MAIZE SEED

4DMM - VISIBLE LIGHT-SENSITIVE REVERSIBLE PHOTOMECHANICAL ACTUATORS BASED ON PVA-DR1

4DQT - USE OF ALTERNATIVE FIBERS AS IRON ORE SLURRY FILTERING FABRIC

4DZQ - INFLUENCE OF RICE HUSK FIBER CONCENTRATION ON THERMAL AND BIODEGRADABILITY PROPERTIES OF PACKAGINGS MADE FROM HPMC FOAM

4DVR - HYDROGELS AS NATURE-BASED SOLUTIONS: ENHANCING ROOT BIOMASS IN EUCALYPTUS SEEDLINGS FOR SUSTAINABLE FORESTRY

4DYM - PERFORMANCE EVALUATION OF HDPE LINERS FOR TYPE IV PRESSURE VESSELS IN NATURAL GAS STORAGE APPLICATIONS

4FDZ - HUMAN HAIR NEEDLED-PUNCHED NONWOVEN AS A NATURAL OILSPILL SORBENT

4DPK - NANOSTRUCTURED FILMS BASED ON POLYETHYLENE AND LIGNIN NANOPARTICLES FOR THE DEVELOPMENT OF ANTI-UV BARRIER PACKAGING

4DYA - AZIDE-FUNCTIONALIZED CELLULOSE AS A POLYMERIC SUPPORT FOR LIPASE IMMOBILIZATION

4FFS - COPOLYMERIC ESTERS, DERIVED FROM ACRYLIC ACID, AS ANTIFREEZE ADDITIVES FOR BIOFUELS

4E4H - BETULINIC ACID ANCHORED TO MESOPOROUS SILICA NANOPARTICLES: SYNTHESIS AND CHARACTERIZATION

4EZW - DEVELOPMENT OF FLEXIBLE GRAPHITE/PLA ELECTROCHEMICAL SENSORS FOR SUSTAINABLE PESTICIDE MONITORING

4DX4 - Mechanical Properties, Antimicrobial and Molluscicidal Activities of Chitosan- Based Films and Film-Forming Solutions Containing Lemongrass (Cymbopogon citratus) Essential Oil

4DXB - DEVELOPMENT OF DENSE AND POROUS CELLULOSE ACETATE MEMBRANES FOR CONTROLLED RELEASE OF THE DRUG INDOMETHACIN: A STUDY OF RELEASE KINETICS

4E4Z - INMOVILIZACIÓN MULTIPUNTO DE LA ENZIMA LACASA EXTREMEMÓFILA EN HIDROGELES DE CARBOXIMETILCELULOSA (CMC) Y POLI(ANHÍDRIDO MALEICO - ALT - ETILENO) (PEMA) COMO MATERIAL POTENCIAL PARA LA DEGRADACIÓN DE DERIVADOS FENÓLICOS PRESENTES EN AGUAS RESIDUALES.

4E4X - PREPARATION OF PH-RESPONSIVE POLY(HEMA-AI) HYDROGELS FOR ORAL DELIVERY OF QUERCETIN

4DZX - INFLUENCE OF TEMPERATURE ON THE SYNTHESIS AND PROPERTIES OF POLY (LACTIC ACID) MEMBRANES

4DYW - Macroporous Cellulose Acetate Monoliths Functionalized with TiO₂: Dual Adsorptive and Photocatalytic Performance for Methylene Blue Removal

4E2N - PRODUCTION AND CHARACTERIZATION OF L-QUEBRACHITOL-ADSORBED MODIFIED MESOPOROUS SILICA NANOPARTICLES

4DPP - INFLUENCE OF CRYSTAL SURFACE CHEMISTRY ON MAGMA DYNAMICS: INVESTIGATION USING POLYMERIC ANALOGUES

4EJ6 - REMOVAL OF CRYSTAL VIOLET DYE FROM WASTEWATER BY Fe3O4/POLY(AA) NANOCOMPOSITE HYDROGEL

4DNN - POLYMERIC DELIVERY SYSTEMS FOR MONOAMMONIUM PHOSPHATE: PROCESSING AND CONTROLLED RELEASE

4E2W - DEVELOPMENT OF USNIC ACID-LOADED MESOPOROUS SILICA NANOCARRIERS FOR CONTROLLED DRUG DELIVERY

4FDS - CORN ZEIN EXTRACTED FROM GROUND GRAINS OR GLUTEN MEAL IS BETTER TO PRODUCE MICROSPHERES OR COATING SILICA MICROSPHERES?

4DY2 - PVDF AND PES MEMBRANES WITH GREEN CLAY: STRUCTURAL EVALUATION AND APPLICATION IN THE SEPARATION OF POLAR PHASE FROM BIODIESEL

4E4J - GLUTARALDEHYDE-FUNCTIONALIZED POLYHYDROXYBUTYRATE: A SUSTAINABLE ALTERNATIVE FOR THE IMMOBILIZATION AND REUSE OF MICROBIAL LIPASES

4FHA - Obtaining thermoplastic cellulose with flame-retardant properties using a mechanochemical approach

4DWH - DEVELOPMENT AND CHARACTERIZATION OF POLYMERS BASED ON POLYCAPROLACTONE (PCL) AND GINGER POWDER WITH PROTEOLYTIC PROPERTY

4DRQ - SÍNTESIS Y CARACTERIZACIÓN DE POLI(ANHÍDRIDO MALEICO- ALT -ÁCIDO ACRÍLICO) FUNCIONALIZADO CON UN AGENTE FOTOCROMICO, PARA APLICACIONES BIOLÓGICAS.

4DN6 - SYNTHESIS AND CHARACTERIZATION OF TMPTA-CROSSLINKED STYRENE COPOLYMER: IMPACT OF STRUCTURE ON CATALYTIC SITE ACCESSIBILITY

4DPD - Polyurethane Development via Sustainable Polyol from Hydroxypropylated Cassava Starch

4DZA - NEW SILICON-CONTAINING OLIGO/POLY(AZOMETHINE)S WITH POTENTIAL APPLICATIONS IN THE OPTOELECTRONIC FIELD. SYNTHESIS AND PROPERTIES

4F6G - SYNTHESIS OF BIOBASED RESIN FROM LIMONENE EPOXIDE

4F2A - HYDROGELS USING CHEMICALLY MODIFIED CASHEW GUM TO EVALUATE ITS CAPACITY AS AN ADSORBENT IN INDUSTRIALLY POLLUTED WASTE.

4E6R - FUNCTIONAL MODIFICATION OF OLEFINS VIA SCCO₂-MEDIATED POLYMERIZATION OF NITROGENATED MONOMERS

4DSV - SYNTHESIS AND CHARACTERIZATION GELATIN METHACRYLOYL / [2-(METHACRYLOYLOXY)ETHYL]TRIMETHYLAMMONIUM CHLORIDE-BASED HYDROGELS

4EYN - SYNTHESIS AND APPLICATION OF QUINOLINE DERIVATIVES AS TYPE I AND TYPE II PHOTOINITIATOR IN PHOTOPOLYMERIZATION REACTIONS

4E2M - RENEWABLE VITRIMERS WITH NATURAL FIBER REINFORCEMENT: A SUSTAINABLE STRATEGY FOR RECYCLABLE THERMOSETS

4DVW - BIO-BASED SUPRAMOLECULAR LIGANDS FROM EPOXIDISED SOYBEAN OIL AND AMINOPYRIDINES FOR METAL-COORDINATION NETWORKS

4E4G - IN-SITU POLYMERIZATION OF PVAC IN SUPERCRITICAL CO2 TO FUNCTIONALIZE PA66 TEXTILE FIBER

4DYP - SUSTAINABLE OXIDATION OF BIOBASED POLY(THIOETHER-ESTER) NANOPARTICLES: ENHANCING THERMAL PROPERTIES VIA HYDROGEN PEROXIDE TREATMENT

4FD4 - Thermoresponsive glycopolymers: Effect of D-glucose on the associative behaviour

4FEX - EFFECT OF EPOXYSILANE OLIGOMER ON THE PROPERTIES OF POLY(ACRYLIC ACID) SOLUTIONS USED IN WATERBORNE PAINT

4EAP - SYNTHESIS AND CHARACTERIZATION OF BIO-BASED POLY(FARNESENE-CO-IBOMA) LATEX FOR PAPER COATING APPLICATION

4DVF - HYBRID EMULSIFIER SYSTEMS IN STYRENE POLYMERIZATION: ROLE OF LIGNIN IN LATEX STRUCTURE AND PROPERTIES

4FCW - EFFECT OF HYDROXYL-TERMINATED POLYBUTADIENE ON THERMAL PROPERTIES AND PHASE SEPARATION IN THERMOPLASTIC POLYURETHANE

4FFD - POLYMERIZATION OF ISOBORNYL METHACRYLATE IN DISPERSED MEDIA

4FAD - NEW QUINOLINE-BASED PHOTOINITIATORS FOR POLYMERIZATION APPLIED TO DENTAL RESINS

4EGZ - SYNTHESIS OF BIOEPOXY USING BIOBASED CURING AGENT

4FC4 - EXPLORING THE RHEOLOGICAL PROPERTIES AND PHASE SEPARATION BEHAVIOR OF POLYESTER TPU

4EAN - SURFACE ROUGHNESS OF CROSSLINKED AND NON-CROSSLINKED UHMWPE: RELEVANCE FOR TEMPOROMANDIBULAR JOINT (TMJ) WEAR TESTING

4DWP - INFLUENCE OF PRINTING SPEED ON THE MECHANICAL PROPERTIES OF 3D PRINTED ABS

4EA6 - TENSILE EVALUATION OF BIODEGRADABLE STARCH FILMS FOR USE AS DRESSINGS

4EAC - ADHESION AND FLEXIBILITY EVALUATION OF UV DTF STICKERS ON DIFFERENT POLYMERIC SUBSTRATES WITH WHITE LAYER VARIATION

4EAQ - PRODUCTION AND CHARACTERIZATION OF CHITOSAN-BASEDFILMS USING DEEP EUTETIC SOLVENTS AS PLASTICIZERS

4ECY - BIODEGRADABLE FILMS OF CORN STARCH AND HONEYCOMB BEESWAX: ANALYSIS OF CONTACT ANGLE AND OPTICAL

4EFG - SURFACE WEAR OF POLY(VINYL CHLORIDE) FLOORING: AN ANALYSIS OF GLOSS, ROUGHNESS, AND WEAR LAYER THICKNESS VARIATIONS

4E6K - EFFECT OF INFILL ANGLE ON TENSILE AND COMPRESSIVE STRENGTH OF 3D-PRINTED POLYMERS

4FGG - Synthesis and characterization of Molecularly Imprinted Polymers applied to the selective removal of the dye Direct Yellow 50

4DN2 - Evaluation of Thermal Stability of Silicone Rubber for Brachytherapy Applications

4ECN - BIOPOLYMERIC FILMS FROM BY-PRODUCTS OF WHITE AND YELLOW CASSAVA PROCESSING: EVALUATION OF MECHANICAL PARAMETERS

4DVC - THERMAL DEGRADABILITY ANALYSIS OF THERMOCHROMIC PIGMENTS INSERTED IN EPOXY RESIN MATRIX

4DQM - Characterization of pet glycolysis products aiming at the production of new materials

4DYR - PEO-b-PPO-b-PEO COPOLYMERS AND LIGNIN: STRUCTURE AND INTERFACIAL PROPERTIES.

4DQW - CHARACTERIZATION OF AVOCADO WASTE FOR APPLICATION IN THERMOPLASTIC STARCH COMPOSITES

4DVN - DILATOMETRY OF POLYTETRAFLUOROETHYLENE ASSISTED BY DIGITAL IMAGE CORRELATION

4F2D - EFFECTS OF IONIZING RADIATION ON THE MOLECULAR STRUCTURE OF POLYETHYLENE

4E6J - ESTIMATION OF ELASTIC-PLASTIC PROPERTIES OF POLYCARBONATE USING A DIGITAL TWIN

4DQG - INFLUENCE OF CELLULOSE NANOFIBRILS ON THE SWELLING PROPERTIES OF POLYACRYLAMIDE HYDROGELS

4EEM - PROCESSING AND CHARACTERIZATION OF POROUS FILAMENTS FOR 3D PRINTING

4E46 - EFFECT OF MULTIPLE EXTRUSION CYCLES ON THE MECHANICAL, RHEOLOGICAL, AND THERMAL PROPERTIES OF RECYCLED COFFEE CAPSULES

4EFT - Influence the parameters for obtaining nanocellulose from rice husk

4EK6 - POLYMER-WOOD HYBRID STRUCTURES

4EKJ - PROCESSING OF LDPE/Di-Cup (XLPE) IN TWIN SCREW EXTRUDER

4DWW - 3D PRINTING OF STRUCTURES FOR REMOTELY PILOTED AIRCRAFT

4ECC - DESIGN OF A MATERIAL WITH POTENTIAL USE IN ACTIVE PACKAGING FOR FATTY FOODS BASED ON A BIODEGRADABLE MULTILAYER BLEND

4EEB - ENHANCING THE PRINTABILITY OF PLA/WE43 COMPOSITE SCAFFOLDS VIA CHAIN EXTENDER ADDITION FOR BONE TISSUE ENGINEERING

4EEQ - 3D PRINTER OPTIMIZATION: ACCESSORY MODELING AND PP/MMT FILAMENT PRODUCTION

4EBP - BRAZIL NUT BIO-INSPIRED VOIDS: A STRATEGY FOR TOUGHNESS ENHANCEMENT

4FGW - THERMAL INSULATION PERFORMANCE OF CYLINDRICAL PACKAGING PRODUCED IN POLYLACTIC ACID BY 3D PRINTING WITH DIFFERENT INFILL PATTERNS

4DWB - A NEW VISION FOR OPTICAL WASTE: EVALUATION OF THE DISPERSION OF OPHTHALMIC LENS RESIDUES AS FILLER IN A STYRENE-BUTADIENE RUBBER MATRIX FOR THE DEVELOPMENT OF A SUSTAINABLE PROTOTYPE

4EPK - EVALUATION OF THE USE OF PRE-CROSSLINKED NBR RUBBER IN O-RING COMPOUNDS: PROCESSABILITY AND MECHANICAL PERFORMANCE

4DSD - CHARACTERIZATION OF RUBBER COMPOSITES WITH COMMERCIAL AND RECOVERED CARBON BLACK BLENDS

4DWD - PREDICTIVE MODELING OF MECHANICAL AND RHEOLOGICAL PROPERTIES OF POLYBUTADIENE WITH RECOVERED CARBON BLACK USING ARTIFICIAL NEURAL NETWORKS

4EFA - Development and evaluation of nitrile rubber film with orange albedo (Citrus sinensis) biomass

4ESC - OPTIMIZING KAOLIN-FILLED NATURAL RUBBER COMPOUNDS USING TESPT SILANE COUPLING AGENT

4DWG - INFLUENCE OF CHEMICAL COMPOSITION AND PARTICLE SIZE OF NEW SUSTAINABLE ACTIVATORS ON VULCANIZATION EFFICIENCY

4DYC - SUSTAINABLE COMPOSITE ENGINEERING WITH STYRENE-BUTADIENE RUBBER AND RECYCLED PET: EFFICIENT MECHANICAL REINFORCEMENT USING SECONDARY-ORIGIN CARBON BLACK

4DVZ - EFFECTS OF RECLAIMED RUBBER ON THE MECHANICAL PERFORMANCE OF ELASTOMERIC COMPOUNDS FOR TIRE APPLICATIONS

4FDF - REUSE OF EPS FOR 3D PRINTER FILAMENT PRODUCTION IN A UNIVERSITY EXTENSION PROJECT

4FHD - PLASTICULTURE AS A PLATFORM FOR INNOVATION AND EDUCATION IN AGRICULTURAL POLYMERS

4ETV - PROPERTIES AND CHARACTERISTICS INVESTIGATIONS OF EXPANDED POLYSTYRENE AND MDF COMPOSITES

4EWM - SUSTAINABLE MATERIALS: SYNTHESIS OF BIO-BASED MATRIX WITH SIMULTANEOUS FORMATION OF LIGNOCELLULOSIC FIBERS REINFORCED COMPOSITES

4EEJ - PRELIMINARY CHARACTERIZATION OF THE EFFECT OF THE FILLER ASPECT RATIO ON THE PROPERTIES OF ABS COMPOSITES

4FE6 - THERMAL CHARACTERIZATION OF POLYPROPYLENE COMPOSITES REINFORCED WITH VEGETABLE FIBERS OBTAINED FROM BABASSU

4EWK - PROCESSING EFFECTS ON COMPATIBILIZED IN BIODEGRADABLE PHBV/PCL-BASED BLENDS WITH CELLULOSE NANOCRYSTALS

4EV4 - RHEOLOGICAL PERFORMANCE AND VIABILITY OF CITRIC PECTIN-XANTHAN GUM BLENDS AS ADDITIVES FOR DRILLING FLUIDS IN THE HIGH SALINITY ENVIRONMENT

4FCE - PROCESSING OF THERMOPLASTIC STARCH NANOCOMPOSITES: EFFECT OF RESIDUAL WATER ON THE INCORPORATION OF CELLULOSE NANOFIBRILS AS A REINFORCEMENT

4EDS - RECYCLED ABS/PLA BLENDS FROM WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) AND ADDITIVE MANUFACTURING WASTE

4FBW - Ethylcellulose/CaO₂ composites for O₂ release

4EEC - FRACTOGRAPHIC EVALUATION OF CF/PAEK LAMINATES WELDED BY RESISTANCE WELDING IN DIFFERENT FIBER ARCHITECTURES

4FHW - COMPARISON OF THE INFLUENCE OF CARBON AND WOOD FIBROUS REINFORCEMENTS ON THE MECHANICAL PROPERTIES OF PLA PRODUCED BY FUSED FILAMENT FABRICATION

4FBB - STRATEGY FOR COMPATIBILIZATION OF PLA/ABS BLENDS USING GRAPHENE FOR THE PRODUCTION OF 3D PRINTING FILAMENTS

4F6T - DEVELOPMENT OF THERMOPLASTIC STARCH COMPOSITE WITH POLYOLEFINS AS CO-PLASTIFIER

4EP4 - PREPARATION AND CHARACTERIZATION OF EXPANDED EVA/MDF POWDER SHEETS

4EGT - Determination of sound absorption coefficients of ethyl vinyl acetate (EVA) composite foam and medium density fiberboard (MDF) powder

4F4M - COMPOSITES BASED ON RECYCLED HIGH-DENSITY POLYETHYLENE (R-HDPE) AND DISCARDED SOLID WASTE FROM THE LEATHER INDUSTRY

4EEN - EFFECT OF MONTMORILONITE CLAY ON POLY(LACTIC ACID)/THERMOPLASTIC STARCH BIOBLEND

4E4B - PBAT/CoFe2O4 MAGNETIC COMPOSITES WITH POTENTIAL IN ELECTROMAGNETIC SHIELDING APPLICATIONS

4EKA - A influência do tratamento a plasma no processo de soldagem por resistência do compósito de PPS/fibra de carbono

4EZT - INFLUENCE OF INTERFACIAL COMPATIBILIZATION ON MECHANICAL BEHAVIOR OF POLYPROPYLENE COMPOSITES WITH HYBRID GLASS FIBERS AND HOLLOW MICROSPHERES

4FBF - THREE PATHS TO ACTIVITY: ANTIOXIDANT FUNCTIONALIZATION OF PLA/PBAT/RICE HUSK COMPOSITE TRAYS WITH NATURAL EXTRACT

4ETK - SYNTHESIS AND PHOTOCATALYTIC EVALUATION OF PECTIN/CORROLE HYBRID MATERIALS FOR DEGRADATION OF NON-STEROIDAL ANTI-INFLAMMATORY DRUGS IN WATER

4FEV - STUDY OF PROCESSES OF FIBER/EPOXY COMPOSITES REINFORCED USING AIR JET SPINNING OF EXPANDED POLYSTYRENE WASTE

4EGV - THE ROLE OF DIFFERENT PROCESSING TECHNIQUES ON THE PROPERTIES OF BIOPOLYMER BLENDS FEATURING MICROSTRUCTURE, WATER VAPOR PERMEABILITY AND SURFACE PROPERTIES

4F24 - ELECTROMECHANICAL PERFORMANCE ANALYSIS OF NAFION/Pt-BASED IPMCS COATED WITH POLYPYRROLE

4EYW - DEVELOPMENT OF RESISTANCE WELDING EQUIPMENT FOR THERMOPLASTIC COMPOSITES

4EWN - VIBRATIONAL ANALYSIS AND TOOL WEAR BEHAVIOR: OVERCOMING CHALLENGES IN THE OPTIMIZATION OF MACHINING PROCESSES FOR HIGH-PERFORMANCE AEROSPACE COMPONENTS

4EYQ - DEVELOPMENT AND CHARACTERIZATION OF MICROFIBROUS MEMBRANES OF MANGABEIRA NATURAL RUBBER/PVA FOR BIOMEDICAL APPLICATION

4FAB - COMPOSITES OF COFFEE SILVER SKIN AND HDPE

4EM4 - HYDROGEL FROM ARABIC GUM MODIFIED WITH GLYCIDYLMETHACRYLATE: POTENTIAL FOR AGRICULTURAL USE

4EZP - UPCYCLING CASSAVA WASTEWATER INTO BIOBASED MULCH FILM FOR SEEDS

4EXY - REGENERATION AND PLASTICIZATION OF CELLULOSE FILMS THROUGH IMMERSION IN AQUEOUS GLYCEROL BATHS

4EHC - EVALUATION OF MECHANICAL PROPERTIES OF POLYLACTIC ACID COMPOSITE REINFORCED WITH AÇAÍ FIBERS

4FBM - Development of Polycaprolactone-Based Biocomposites Reinforced With Eucalyptus Cellulose Fibers

4EVF - EFFECT OF SURFACE TREATMENT BY ANODIZATION ON THE ADHESION OF PEI/GLASS FIBER–ALUMINUM 2024-T3 JOINTS WELDED BY OXY-FUEL METHOD

4FAF - PLA/PBSA FOAMS: HOW PROCESSING AFFECTS PBSA REACTIVITY AND EXPANSION CAPABILITY

4EMB - ANALYSIS OF POST-CONSUMER RECYCLED PE, PP, AND PET BLENDS: A MORPHOLOGICAL, THERMAL, AND RHEOLOGICAL STUDY

4ECZ - PRODUCTION OF HYDROXYPROPYL CELLULOSE (HPC) FILAMENTS LOADED WITH POLYCAPROLACTONE (PCL) BY HOT MELT EXTRUSION (HME) FOR FUTURE APPLICATION IN 3D PRINTING

4EQQ - EVALUATION OF THE MECHANICAL PROPERTIES OF POLYPROPYLENE COMPOSITES MODIFIED WITH DIFFERENT LENGTHS AND CONCENTRATIONS OF GLASS FIBERS

4EEP - PRELIMINARY CHARACTERIZATION OF THERMOPLASTIC STARCH AND COTTON FIBER BIOCOMPOSITE

4DZT - PBAT/Brazil Nut Shell Residue Biocomposites: Evaluation of Mechanical andThermal Properties and Biodegradation in Synthetic Seawater

4FD6 - EFFECT OF PROTONATING AGENT ON THE STRUCTURAL AND ELECTRICAL PROPERTIES OF POLYANILINE

4EW2 - EVALUATION OF THE ANTIBACTERIAL ACTION OF CONDUCTIVE POLYMER COMPOSITES OBTAINED BY EXTRUSION AND INJECTION

4ESQ - INFLUENCE OF CHITOSAN CONCENTRATION ON GELATIN SCAFFOLDS CROSSLINKED WITH GLUTARALDEHYDE

4ETQ - PRODUCTION OF POLYETHYLENE/ THERMOPLASTIC STARCH POLYMER BLENDS AIMED AT PACKAGING APPLICATIONS

4EXP - THERMAL AND MECHANICAL CHARACTERIZATION OF POLY(LACTIC ACID)/Fe-MOF COMPOSITES FOR GAS SEPARATION MEMBRANES

4EVV - EFFECT OF BRASGEL CLAY AND POLYVINYLPYRROLIDONE ON THE STRUCTURE AND PERFORMANCE OF POLYSULFONE/POLYETHERSULFONE BLEND MEMBRANES

4FEK - PREPARATION AND CHARACTERIZATION OF POLY(VINYLIDENE FLUORIDE) AND CARBON BLACK-BASED COMPOSITES FOR ELECTROMAGNETIC SHIELDING APPLICATIONS

4F26 - WASTEWATER TREATMENT USING POLYSULFONE/ACTIVATED CARBON MEMBRANES

4FGK - ABS-MODIFIED ACRYLATE BLENDS FOR IMPROVED MECHANICAL PERFORMANCE IN SLA 3D PRINTING

4EPT - ANALYSIS OF THE MECHANICAL PROPERTIES OF PBS/EUCALYPTUS FIBER COMPOSITES: IMPACT OF PARTICLE SIZE IN UNIFORMLY LOADED PRESSED SAMPLES

4DYY - IMPROVING THE EFFIENCY OF POLYURETHANE FOAM PRODUCTION WITH DIETHANOLAMINE BY MEANS OF DATA ENVELOPMENT ANALYSIS

4DZ2 - IMPACT ABSORPTION IN POLYURETHANE FOAMS WITH AND WITHOUT DIETHANOLAMINE

4ERJ - EFFECT OF BUTIÁ ALMOND OIL INCORPORATION ON THE MECHANICAL AND PHYSICOCHEMICAL PROPERTIES OF BOVINE GELATIN FILMS

4F4J - THERMAL BEHAVIOR EVALUATION OF POLYPROPYLENE COMPOSITES REINFORCED WITH BABAÇU COCONUT CELLULOSE

4EGW - PREPARATION, CHARACTERIZATION AND EFFECTS OF PLA-g-(St-co-GMA) AS A COMPATIBILIZER FOR POLY (LACTIC ACID)/LICURI STRAW FIBER COMPOSITES

4EWJ - THE INFLUENCE OF REACTIVE COMPATIBILIZATION VIA EPOXIDE-BASED CHAIN EXTENDER ON THE MORPHOLOGY AND THERMAL PROPERTIES OF PHBV/PCL BLENDS

4EQW - DEVELOPMENT AND CHARACTERIZATION OF BIODEGRADABLE COMPOSITES BASED ON THERMOPLASTIC STARCH, POLY(BUTYLENE ADIPATE-CO-TEREPHTHALATE) AND LICURI FIBER

4DWK - BIODEGRADABLE COMPOSITES OF MODIFIED STARCH REINFORCED FROM FRESH COCOA SHELLS

4ENN - EFFECT OF MONTMORILLONITE CLOISITE 20A ON THE PROPERTIES OF HIGH-DENSITY POLYETHYLENE FILMS

4FGV - EVALUATION OF THE PERFORMANCE OF THE ZnFe2O4/PANI COMPOSITE AS A PHOTOTHERMALLY STIMULATED GAS SENSOR

4EYC - DEVELOPMENT OF ANTIBACTERIAL PLA FILMS INCORPORATING EU/MMT-NPZN NANOCOMPOSITE (ERUCAMIDE/MONTMORILLONITE-ZINC OXIDE NANOPARTICLES)

4EZ4 - REDUCTION OF GRAPHENE OXIDE ON POLYMERIC FILMS: COMPARISON OF THERMAL, UV AND LASER METHODS FOR FLEXIBLE ELECTRONICS APPLICATIONS

4FAK - SYNTHESIS, SPECTROSCOPIC CHARACTERIZATION, AND CONDUCTOMETRIC ASSESSMENT OF POLY (IONIC LIQUID) - BIOPOLYMER INTERACTIONS

4EWR - ENCAPSULATION OF LARVICIDAL COMPOUNDS IN CHITOSAN NANOPARTICLES: CHARACTERIZATION AND LARVICIDAL ACTIVITY

4FEM - MICROFLUIDIC FABRICATION OF POLYCAPROLACTONE NANOCAPSULES FOR THE DELIVERY OF AMAZONIAN OILS: PHYSICOCHEMICAL CHARACTERIZATION AND CYTOCOMPATIBILITY

4F6S - CHITOSAN AND POLY(Ɛ-CAPROLACTONE)-BASED NANOPARTICLES FOR POTENTIAL BIOMEDICAL APPLICATION

4FG2 - Structure, Morphology of Electrospun Polycaprolactone Nanofibers with ZnO and Annatto Extract.

4FG6 - DEVELOPMENT AND EVALUATION OF MULTILAYER POLYMERIC NANOFIBERS WITH PACLITAXEL AS A POTENTIAL THERAPY FOR SKIN CANCER

4ERM - EFFECT OF BASED PHOSPHONIUM IONIC LIQUID AS FLAME-RETARDANT IN POLYAMIDE 6–OMMT NANOCOMPOSITES

4EP2 - EVALUATION OF THE MECHANICAL PROPERTIES OF BORON NITRIDE-MODIFIED ACRYLIC RESINS FOR DENTAL APPLICATIONS VIA 3D PRINTING

4FEG - COMPARATIVE STUDY OF NANOCELLULOSES FROM SUGARCANE BAGASSE DERIVED FROM THE PITH AND FIBER FRACTIONS

4FEA - MECHANICAL PROPERTIES EVALUATION OF PBSA/GRAPHENE AND PBSA/GRAPHENE OXIDE NANOCOMPOSITES

4FEF - THE RHEOLOGICAL AND STRUCTURAL PROPERTIES OF XANTHAN GUM NANOSTRUCTURED WITH GRAPHENE OXIDE: THE EFFECT OF LATERAL SIZE

4ENS - DEVELOPMENT OF POLYAMIDE 6 AND GRAPHENE OXIDE NANOCOMPOSITE AND JOINING WITH ALUMINUM ALLOY THROUGH INJECTION OVERMOLDING

4F4D - INTERACTION OF PHOTOACTIVE COPOLYMERS WITH FLUORESCENT NANOPARTICLES TO CREATE LIGHT-SENSITIVE FILMS FOR BIOLOGICAL APPLICATIONS.

4FHR - MORPHOLOGICAL AND SPECTROSCOPIC EVALUATION OF ELECTROSPUN FIBERS CONTAINING ALOE VERA AND COPAIBA OLEORESIN

4FDX - PLA-BASED BIONANOCOMPOSITE REINFORCED WITH CELLULOSE NANOCRYSTALS (CNC) AND GRAPHENE OXIDE (GO)

4FDP - EVALUATION OF THE DISSOLUTION AND PLASTICIZATION OF CELLULOSE WITH DEEP EUTECTIC SOLVENTS

4FEB - PLASMA-TREATED CHITOSAN-SUPPORTED Ag₂SeO₃ NANOSTRUCTURES FOR ANTIFUNGAL CONTROL OF CACAO PATHOGENS

4FDA - MAGNETITE/POLYPYRROLE HYBRID NANOCOMPOSITES AS A PROMISING ELECTROMAGNETIC INTERFERENCE SHIELDING MATERIAL

4FBJ - UV-ACTIVE NANOCELLULOSE CRYOGEL PHOTODETECTORS: TUNING ELECTRICAL PROPERTY THROUGH OXIDE FUNCTIONALIZATION.

4FBD - INFLUENCE OF EXTRUSION SCALE ON THE PROPERTIES OF POLYPROPYLENE/GRAPHENE NANOCOMPOSITES FROM COMMERCIAL MASTERBATCHES

4ER2 - INVESTIGATION OF APTES FUNCTIONALIZATION ON BIOSILICATE® THROUGH RF PLASMA TREATMENT

4FCK - CHARACTERIZATION OF GRAPHENE NANOPLATELET-ENHANCED MASTERBATCHES BASED ON DIFFERENT POLYOLEFINS

4F4P - ELECTROSPUN PLGA MEMBRANES WITH NIOBIUM PENTOXIDE NANOPARTICLES FOR POTENTIAL BIOMEDICAL APPLICATIONS

4F6J - PLA/PHBV NANOCOMPOSITES WITH SEPIOLITE NANOPARTICLES AND TANNIC ACID FOR SUSTAINABLE ANTIMICROBIAL PACKAGING APPLICATIONS

4FCS - SUSTAINABLE POLYURETHANE/GRAPHENE OXIDE NANOCOMPOSITES FOR HIGH-PERFORMANCE COATING

4EBX - LIFE CYCLE ASSESSMENT OF CONDUCTIVE REGENERATED CELLULOSE FILM WITH SILVER NANOPARTICLES CONSIDERING TWO CELLULOSE EXTRACTION SCENARIOS

4F6K - ROLE OF GRAPHENE NANOPLATELETS IN THE DEGRADATION OF POLYETHYLENE

4F6Z - ECO-FRIENDLY PACKAGING FILMS: IMPACT OF REINFORCEMENT WITH GELATIN-BASED CARBON DOTS

4EY2 - HIGHLY EFFICIENT DYE ADSORPTION USING ADVANCED ELECTROSPUN PS/FGO/PPY MEMBRANES

4FFE - SOLVENT-FREE EPOXY COATINGS WITH GRAPHENE-BASED NANOMATERIALS FOR SUSTAINABLE ANTICORROSIVE APPLICATIONS

4FDY - INFLUENCE OF SURFACTANTS ON CHITOSAN–LIGNIN NANOPARTICLES FOR THYMOL DELIVERY, AIMING ANTIMICROBIAL TEXTILES

4F2F - STUDY OF THE COEFFICIENT OF FRICTION AND ELECTRICAL CONDUCTIVITY IN POLYOLEFIN/GRAPHENE NANOCOMPOSITES

4EXJ - INFLUENCE OF GRAPHENE ON POLYOLEFIN NANOCOMPOSITES: DENSITY, MELT FLOW, AND VISCOSITY

4ETA - APPROACHES TO IMPROVE THE DISPERSION OF NEAT AND MODIFIED CNC IN PLA NANOCOMPOSITES FILMS

4FCM - THERMOPLASTIC POLYURETHANE NANOCOMPOSITES WITH CARBON NANOSTRUCTURES: RELATIONSHIP BETWEEN MORPHOLOGY WITH THERMO-MECHANICAL AND ELECTRICAL PROPERTIES

4F2B - EFFECT OF GRAPHENE ON CONTACT ANGLE, SURFACE ENERGY AND DISPERSIBILITY IN POLYPROPYLENE NANOCOMPOSITES

4ETE - MECHANICAL PROPERTIES OF SHORT CARBON FIBERS AND GRAPHENE NANOPLATELETS REINFORCED POLYPROPYLENE HYBRID NANOCOMPOSITES

4F6Q - The Effect of Graphene Dispersion on Hydrophobicity and Surface Energy in Polyethylene Nanocomposites.

4EWQ - BUILDING ELECTRICALLY CONDUCTIVE PATHWAYS IN NANOCOMPOSITES OF POLYETHYLENE TEREPHTHALATE WITH ADDITION OF GRAPHITE NANOPLATELETS

4ECS - EVALUATION OF FLEXURAL STRESS OF COMPOSITES WITH POLYESTER AND COCONUT FIBER WITH AND WITHOUT CARBON BLACK

4ENP - ALGAE-BASED POLYMERS AS SUSTAINABLE ALTERNATIVE TO PETROLEUM-DERIVED MATERIALS: A SCIENTIFIC PROPOSAL

4EY4 - LIFE CYCLE ASSESSMENT OF CASTOR OIL POLYURETHANE FOAMS PRODUCED IN BRAZIL: A PRELIMINARY STUDY

4EWB - ADSORPTIVE REMOVALOF METHYL ORANGE USING BIOCHAR SYNTHESIZED FROM CORN WASTE

4F4K - RECYCLING IN THE ESPINHAÇO RANGE: A CASE STUDY IN THE MICRO-REGION OF CONCEIÇÃO DO MATO DENTRO-MG

4EJB - MECHANICAL PROPERTIES OF RECYCLED COMPOSITES FROM WASTE TIRES RUBBER (TR) AND EXPANDED POLYSTYRENE (EPS)

4EXN - SYNERGISTIC EFFECT OF COMBINING OPUNTIA COCHENILLIFERA CACTUS MUCILAGE AND XANTHAN GUM ON THE PROPERTIES OF WATER-BASED DRILLING FLUIDS

4ER4 - SEGREGATION AND INDUSTRIAL RECOVERY OF MUNICIPAL SOLID WASTE (MSW)

4EYR - COMPREHENSIVE EVALUATION OF THE EFFECT OF CITRIC ACID CONCENTRATION AS A CROSSLINKING AGENT IN OBTAINING CELLULOSE AEROGELS: INFLUENCE IN POTENTIALLY TOXIC ELEMENTS REMOVAL FROM CONTAMINATED WATER

4DV4 - BIODEGRADABLE POLY(BUTYLENE ADIPATE TEREPHTHALATE) FILMS INCORPORATING ORANGE ESSENTIAL OIL: BIODEGRADATION BEHAVIOR IN ANAEROBIC CONDITIONS

4EMV - PRODUCTION OF BIOPOLYOL AND SYNTHESIS OF POLYURETHANES FROM CARDANOL EXTRACTED FROM CASHEW NUT SHELL LIQUID

4EZK - PLASTICS IN AGRO-ECOSYSTEMS: WHEN THE REUSE OF SOLID URBAN WASTE BECOMES A PROBLEM

4EQP - INCORPORATION OF POLYURETHANE FOAM WASTE WITH NIOBIUM PENTOXIDE/CLAY IN CONCRETE FORMULATIONS

4EZF - REUSE OF POLYAMIDE FIBERS TO OBTAIN MEMBRANES FOR THE TREATMENT OF EFFLUENTS CONTAINING TEXTILE DYES

4EZC - USE OF INDUSTRIAL WASTE FOR OBTAINING HYBRID MEMBRANES APPLIED IN THE SEPARATION OF OIL EMULSIONS

4FAW - THERMAL DEGRADATION KINETIC OF MULTILAYER LDPE WASTE FOR PYROLYTIC CHEMICAL RECYCLING

4EVB - LIGNIN AS A GREEN PLATFORM FOR ORGANIC AND ORGANOMINERAL FOLIAR FERTILIZERS: EFFECTS OF ALKALINE SOLUBILIZATION ON COLLOIDAL AND STRUCTURAL PROPERTIES

4EXM - POROUS AEROGEL INCORPORATED WITH CLAYS FOR DYE REMOVAL FROM WATER

4EVG - ANALYSIS OF MULCHING FILM DEGRADATION IN AN ACCELERATED WEATHERING CHAMBER

4FAZ - EVALUATION OF THE TECHNICAL FEASIBILITY OF COMMERCIALCOMPATIBILIZERS FOR MULTILAYER FILM RECYCLING

4EV2 - TRENDS AND PROSPECTS IN THE USE OF RECYCLED POLYPROPYLENE: A BIBLIOMETRIC ANALYSIS

4EXV - Linking Cellulose Chains Using Dibromoalkanes in the DMSO/DBU/CO₂ Switchable Solvent System

4EWF - Influence of lignin structure and isolation on its oxidative depolymerization into aromatic monophenols

4ERT - EVALUATION OF THE INFLUENCE OF BALL MILL ON THE PROCESS OF OBTAINING NANO AND MICRO FIBERS IN ALKALINE SOLUTION

4ERW - EVALUATION OF FLEXURAL STRESS OF COMPOSITES WITH POLYESTER AND COCONUT FIBER WITH AND WITHOUT CARBON BLACK

4ERC - PARTIAL CARBON FOOTPRINT OF PECTIN EXTRACTED BY ACID HYDROLYSIS FROM FRUIT-PROCESSING WASTES

4EXA - EXTRACTION AND CHARACTERIZATION OF AVOCADO STARCH (PERSEA AMERICANA MILL) FOR POTENTIAL PRODUCTION OF BIODEGRADABLE FILMS

4ERV - BRAZILIAN RENEWABLE MATERIALS APPLIED TO MATERIALS SCIENCE: A LITERATURE REVIEW AND EXAMPLES

4F6B - ADSORPTION OF CRYSTAL VIOLET BY A CHITOSAN DERIVATIVE OBTAINED BY NUCLEOPHILIC VINYLIC SUBSTITUTION

4EVM - DEVELOPMENT OF BIOCOMPOSITE FOR AGRICULTURAL CULTIVATION SYSTEMS

4ERY - METHOD FOR REPLACING SUBSTANCE OF CONCERN IN POLYURETHANE RIGID FOAMS AIMING SAFER MATERIALS

4EQD - STUDY OF THE THERMAL, MORPHOLOGICAL AND MECHANICAL PROPERTIES OF COMPOSITES BASED ON METALLIZED FLEXIBLE PACKAGING WASTE AND INDUSTRIAL EPM

4ESE - FROM WASTE TO VALUE: R&D-DRIVEN PLASTIC RECYCLING IN THE AMAZON

4EWT - DEVELOPMENT OF A HYDROGEL BASED ON KAPPA-CARRAGEENAN AND GUAR GUM CONTAINING HYDROXYAPATITE FOR BONE REGENERATION APPLICATIONS

4ETY - Investigatinghermal Degradation of Poly(e-caprolactone) Reinforced with WE43 Alloy

4EWV - Evaluation of Citric Acid and Tannic Acid as Crosslinking Agents for Gelatin and Polyvinyl Alcohol-Based Films for Application as Biodegradable Dressings

4FGA - DEVELOPMENT OF A BIOINK OF COLLAGEN, METHACRYLATE SILK FIBROIN AND MONTMORILLONITE CLAY FOR BONE TISSUE

4DYB - USE OF CELLULOSE-DERIVED POLYMERS IN THE DEVELOPMENT OF EXTENDED-RELEASE ATENOLOL TABLETS

4EXD - Thermal Evaluation of Bacterial Cellulose Composites Coated with Sodium Alginate and Incorporated with silver nanoparticles as an Alternative Strategy for Complex Wounds

4ETC - BIOCOMPATIBLE FILAMENTS CONTAINING SODIUM ALENDRONATE AND CURCUMIN: EVALUATION OF THE COMPOSITION’S POTENTIAL FOR LOCAL DRUG DELIVERY

4EVR - Sodium alginate and carboxymethylcellulose hydrogels as a potential drug delivery system

4ER6 - 3D-PRINTED CARBOXYMETHYLCELLULOSE-LAPONITE NANOCOMPOSITE HYDROGELS FOR WOUND HEALING AND CONTROLLED DRUG RELEASE

4FHK - EVALUATION OF IN VITRO RELEASE OF COPPER-CURCUMIN AND ZINC-CURCUMIN COMPLEXES IN CHITOSAN ANTIMICROBIAL MEMBRANES

4ESN - DEVELOPMENT AND CHARACTERIZATION OF BIOCOMPOSITES AS FILLERS FOR DOPING WITH PCL AND THEIR APPLICATION IN TISSUE ENGINEERING VIA ADDITIVE MANUFACTURING

4FH6 - PREPARATION AND PHYSICOCHEMICAL CHARACTERIZATION OF A NANOEMULSION CONTAINING Jatropha gossypiifolia LEAF EXTRACT AND EVALUATION OF ITS WOUND HEALING POTENTIAL

4DYV - DEVELOPMENT AND CHARACTERIZATION OF CHITOSAN-BASED POLYMERIC FILMS: THE ROLE OF GLYCEROL IN MODULATING PHYSICOCHEMICAL PROPERTIES

4FAY - DEVELOPMENT OF BACTERIAL CELLULOSE COMPOSITES WITH GRAPHITE, NB2O5 AND GR/NB2O5 FILLERS WITH ANTIBACTERIAL EFFECT

4EGF - PHOTOLUMINESCENCE PERFORMANCE OF CARBON QUANTUM DOTS: FROM SYNTHESIS TO INCORPORATION INTO ELECTROSPUN FIBERS

4FHV - TSAP-2 ADSORPTION AND MOLECULAR INTERACTION WITH MONTMORILLONITE CLAY

4F6E - Centrifugally Spun Microfibers of Polycaprolactone/Graphene Oxide: Potencial Application in Bone Tissue Engineering

4EX6 - ELECTROSPUN MUCOADHESIVE NANOFIBERS AS A LOCALIZED STRATEGY FOR THE TREATMENT OF RECURRENT VULVOVAGINAL CANDIDIASIS

4E2G - DEVELOPMENT AND CHARACTERIZATION OF CHITOSAN FILMS INCORPORATED WITH STRYPHNODENDRON ADSTRINGENS EXTRACT

4F6P - DEVELOPMENT AND PHYSICOCHEMICAL CHARACTERIZATION OF TPU/TPS BLENDS FOR FLEXIBLE WOUND DRESSING APPLICATIONS

4F46 - BALANCING STRENGTH AND CELL SURVIVAL: OPTIMIZING MECHANICAL PROPERTIES AND CELL VIABILITY IN BIOINK FORMULATIONS

4EYG - LASER-ASSISTED HOT EMBOSSED TECHNIQUE APPLIED FOR PATTERNING NANOSTRUCTURES ON POLYSTYRENE AND PLA SURFACES

4FDE - PRODUCTION AND CHARACTERIZATION OF CELLULOSE/POLYVINYL ALCOHOL/CHONDROITIN SULFATE MEMBRANES

4FDD - POROUS CELLULOSE-BASED MEMBRANES VIA SALT LEACHING

4EHD - STUDY OF THE SWELLING MECHANISM AND MECHANICAL PROPERTIES OF GUM ARABIC HYDROGELS LOADED WITH PINE NUT SHELL BRAN.

4EHA - STUDY OF METHYLENE BLUE DYE REMOVAL BY ALGINATE BEADS FUNCTIONALIZED WITH ACTIVATED CARBON OBTAINED FROM PINE NUT SHELL

4F4E - STUDY OF MULTILAYER FILMS OF NANOFIBRILLATED CELLULOSE FOR PACKAGING APPLICATIONS AS A BARRIER TO WATER AND GREASE.

4EEA - THIN FILMS OF NATURAL RUBBER AND CARBON DOTS FOR SENSING APPLICATIONS

4EAJ - COATING PAPER WITH MICROFIBRILLATED CELLULOSE, NATURAL RUBBER, AND PECTIN TO IMPROVE BARRIER PERFORMANCE

4EM2 - PREPARATION AND CHARACTERIZATION OF POLYMERIC MEMBRANES FOR APPLICATION IN DICLOFENAC REMOVAL PROCESSES

4EBY - EVALUATION OF THE INFLUENCE OF pH ON THERMOPLASTIC STARCH MODIFICATION BY REACTIVE EXTRUSION

4E6Y - EUGENOL EFFECTS ON CATALYSIS AND DETECTION IN UREASE AND CONJUGATED POLYMER FILMS

4EGX - ENCAPSULATION OF AQUEOUS MORINGA OLEIFERA LAM. EXTRACT BY IONIC GELATION USING NATURAL POLYMERS

4EGY - ENCAPSULATION OF AQUEOUS HIBISCUS SABDARIFFA EXTRACT BY IONIC GELATION WITH NATURAL POLYMERS

4EH4 - BACTERIAL CELLULOSE-BASED NANOCOMPOSITES WITH TiO₂ AND ZnO: A SIMPLE PREPARATION APPROACH

4EHH - PRODUCTION OF MICROPARTICLES WITH BIOPOLYMERS BY SPRAY DRYING FOR THE ENCAPSULATION OF BIOTECHNOLOGICAL ACTIVE INGREDIENTS

4EDD - TUNING ACOUSTIC AND MECHANICAL PROPERTIES OF HYDROXYPROPYL METHYLCELLULOSE CRYOGELS BY FREEZING CONDITIONS

4EEV - NANOCLAY-REINFORCED CONDUCTIVE POLYMER HYDROGEL: INTERFACELESS ARCHITECTURE FOR FLEXIBLE ENERGY STORAGE

4E6S - PERFORMANCE EVALUATION OF CALCIUM OXIDES IN DESICCANT MASTERBATCHES FOR FLEXIBLE PACKAGING

4EH2 - CHARACTERIZATION OF POLYAMIDE AND POLYESTER FABRIC MEMBRANES FOR USE IN ANIONIC EXCHANGE MEMBRANE FUEL CELL

4F6W - CHARACTERIZATION OF PVA/GRAPHENE OXIDE-BASED CATIONIC MEMBRANE FOR FUEL CELL

4EAD - POLYMER-BASED MICROWAVE ABSORBING MATERIALS FOR MILITARY STEALTH CLOTHING IN THE KU-BAND

4EDG - Development and characterization of poly(lactic acid) membranes for potencial application in gas permeation

4EER - ZnO-NPS OBTAINED FROM GREENER APPROACH: FILLING PECTIN-BASED FILMS AND EVALUATING THE IMPACT ON OPTICAL AND STRUCTURAL PROPERTIES

4EDF - TOCNF AND ALGINATE FILMS AS PH- AND HUMIDITY-RESPONSIVE ACTUATORS

4EBD - ELECTROMAGNETIC SIMULATION OF POLYMERIC COMPOSITE-BASED RADOMES WITH INTEGRATED FSS FOR 5G ANTENNAS OPERATING AT 24–27 GHZ

4EAT - USE OF PEANUT SKIN (ARACHIS HYPOGEA L.) AS A BIOACTIVE AGENT IN BABASSU MESOCARP FLOUR FOAM TRAY

4EJX - "INVESTIGATION OF NOVEL BIODEGRADABLE POLYMERIC FOAMS WITH MALT FIBER FROM AGRO-INDUSTRY RESIDUE"

4ECF - DEVELOPMENT OF ECO-FRIENDLY CARDBOARD COATED WITH A BIODEGRADABLE MATERIAL WITH WATER AND GREASE RESISTANCE FOR POTENTIAL USE IN FOOD PACKAGING

4ERQ - XANTHAN PRUNI GUMS RHEOLOGICAL PROFILE MODULATION THROUGH ASSOCIATION OF CHEMICAL MODIFICATIONS

4EJY - FUNCTIONALIZATION OF SPACER FABRIC WITH POLYPYRROLE FOR ELECTRONIC TEXTILE INTEGRATION

4EQA - DEVELOPMENT OF BIODEGRADABLE STARCH AND COLLAGEN-BASED POLYMERIC SYSTEMS FOR THE SLOW-RELEASE OF NUTRIENTS IN SOILS

4EAM - NATURAL WAX PICKERING EMULSIONS STABILIZED BY CATIONIC CELLULOSE NANOFIBRILS FOR BIOINSPIRED PAPER COATINGS WITH IMPROVED WATER RESISTANCE

4EQR - APPLICATION OF MICROWAVES IN THE SYNTHESIS OF POLY (LACTIC ACID) (PLA)

4EPQ - APPLICATION OF DIFFERENTS POLYMERIC MEMBRANES TO EFFICIENT REMOVAL OF HERBICIDE 2,4-DICHLOROPHENOXYACETIC ACID FROM AQUEOUS SOLUTION

4EQN - CELLULOSE TRIACETATE MEMBRANES FOR CO₂ CAPTURE PREPARED FROM LOW-COST SOLVENTS

4EKV - DIETARY ANTIOXIDANT EXTRACT FROM OLIVE POMACE STABILIZED BY SPRAY DRYING WITH THE AID OF LOW VISCOSITY XANTHAN

4EKZ - BIODEGRADABLE POLY(LACTIC ACID) MEMBRANES WITH ZNO NANOPARTICLES FOR APPLICATION IN FACE MASKS

4EFX - INFLUENCE OF ALOE VERA POLYMER IN CITRIC ACID CROSSLINKED HYDROGELS ON AGRICULTURAL SEED GERMINATION

4E6X - BOVINE MILK CASEINS COTTON TEXTILE FINISHING CROSSLINKED WITH CITRIC ACID FOR FIRE RETARDANT PURPOSES

4EDT - STUDY ON THE BIODEGRADABILITY OF PLA/MG(OH)2 COMPOSITE FILMS FOR SUSTAINABLE ORGANIC ELECTRONICS

4EEF - ENHANCING FLAME RETARDANCY AND MECHANICAL PROPERTIES INCORPORATING ATH INTO GFRP COMPOSITES

4EGK - BIODEGRADABLE POLYMERIC FILMS INCORPORATED WITH DIFFERENT VEGETABLE OILS: APPLICABILITY TO STRAWBERRY PACKAGING

4EDM - ANTIBACTERIAL LINEAR LOW-DENSITY POLYETHYLENE (LLDPE) FILMS BY INCOPORATION OF EU-MMT/NPZNO NANOCOMOPISTE (ERUCAMIDE-MONTMORILLONITE/ZINC OXIDE NANOPARTICLES).

4EBQ - DEVELOPMENT AND CHARACTERIZATION OF CONDUCTIVE AND SELF-HEALING PEDOT: PSS-BASED HYDROGELS WITH Fe³⁺ IONS

4EBK - DEVELOPMENT OF A BIODEGRADABLE MULTILAYER PACKAGE BASED ON A BIOPOLYMERIC BLEND TO EXTEND THE SHELF LIFE OF FATTY FOODS

4EA2 - DEVELOPMENT OF A POLYMERIC COMPOSITE MATERIAL FOR ELECTROMAGNETIC RADIATION ABSORPTION IN BIRD DRONES

4EEY - POTENTIAL APPLICATION OF DIUTAN GUM AS A POLYMER-BASED RHEOLOGICAL ADDITIVE IN AQUEOUS DRILLING FLUIDS

4E6M - Use of unrefined biomass in the development of renewable foams

4EBG - A PROMISING FILTER PROTOTYPE BASED ON BACTERIAL CELLULOSE FOR SUSTAINABLE WATER TREATMENT

4EDW - Thermoplastic Starch-Based Polymeric System with Struvite and Nanolignin/Nanocellulose for Controlled Release of Nutrients

4DPW - PDMS COMPOSITES WITH INCORPORATION OF MESOPOROUS NANOPARTICLES OF SIO2: EVALUATION OF ENVIRONMENTAL DEGRADATION OF PHOTOVOLTAIC CELLS ENCAPSULANT

4EF4 - DEVELOPMENT OF AN ANGICO GUM-BASED HYDROGEL COMPOSITE FOR THE REMOVAL OF CIPROFLOXACIN

4EGE - Enhancing Creep Resistance in Limonene-Based Polymer via Metal Coordination

4EF2 - CONTROLLED DRUG DELIVERY USING BABASSU MESOCARP CRYOGEL

4EDZ - SINTHESIS AND CHARACTERIZATION OF POLYURETHANE FROM PET FIBERS OF OFFSHORE MOORING ROPES

4EEZ - ECOLOGICAL HYDROGELS OF CASSAVA GUM AND SUGARCANE BAGASSE ASH: AN ALTERNATIVE FOR AGRICULTURAL SOIL IMPROVEMENT

4DZZ - SULFONATION OF POLYSTYRENE FOR THE PROMOTION OF ELECTROSTATIC COMPATIBILIZATION

4EFW - APPLICATION OF AN EUGENOL-BASED RESIN IN 3D PRINTING: EXPLORING THIOL-ENE/ACRYLATE REACTIONS FOR SUSTAINABLE ADDITIVE MANUFACTURING

4FHS - SYNTHESIS AND APPLICATION OF AZAPENTALENE DERIVATES AS PHOTOINITIATORS IN PHOTOPOLYMERIZATION REACTIONS

4FFQ - DEVELOPMENT OF MOLECULARLY IMPRINTED POLYMERS FOR SELECTIVE PARACETAMOL ADSORPTION

4DWM - GEMINI AND LYSINE DERIVATIVE SURFACTANTS IN METHYL METHACRYLATE EMULSION POLYMERIZATION

4EGQ - Influence of temperature on the epoxy resin gel time for use in towpreg formulation

4FHM - SYNTHESIS AND THERMAL PROPERTIES OF BIOVITRIMERS BASED ON EPOXIDIZED VEGETABLE OIL AND EUGENOL WITH BIOBASED ACIDS

4EFZ - SYNTHESIS OF POLY[LIMONENE-CO-2,2’-(ETHYLENEDIOXY)DIETHANETHIOL TIOETHER] VIA PHOTOINDUCED THIOL-ENE POLYMERIZATION

4EFB - TAILORED BIOPOLYURETHANE FOAM FROM SOYBEAN DERIVATIVES

4DQN - Polyurethane Foam From a Biopolyol Composed of Oxypropylated Cellulose Nanofibrils and Vegetable Polyol

4DVP - INFLUENCE OF ACID STRUCTURE ON THE CROSSLINKING DENSITY AND THERMAL STABILITY OF ESO-BASED THERMOSETS

4EHF - Renewable Polymeric Nanoparticles of a Castor Oil Derivative

4EHE - NEW FTIR-ATR SPECTROSCOPY METHOD FOR POLY(TRIMETHYLENE ETHER GLYCOL) (PO3G) SYNTHESIS MONITORING

4DVH - EFFECT OF POST-CURING ON DEGRADATION KINETICS AND HALF-LIFE OF AN EPOXY-BASED STRUCTURAL ADHESIVE FOR OIL AND GAS APPLICATIONS

4ENA - SYNTHESIS AND CHARACTERIZATION OF CROSS-LINKED STARCH WITH CITRIC ACID FOR AEROGEL FORMULATION

4EQ4 - EVALUATION OF THE USE OF PLASTICIZER DERIVED FROM CASHEW NUT SHELL OIL AS A SUBSTITUTE FOR DIISOBUTYL PHTHALATE IN WATER-BASED POLYVINYL ACETATE (PVAC) ADHESIVE

4EHY - Analysis of the degradation of PLA samples over time in anaerobic biodigesters

4EKD - THERMAL AND RHEOLOGICAL CHARACTERIZATION OF EVA/CLAY/NIOBIUM PENTOXIDE COMPOSITIONS

4ENR - EVALUATION OF CRUDE OIL AND VEGETABLE OIL SORPTION BY POLYURETHANE COMPOSITES WITH DIFFERENT CONCENTRATIONS OF IMPERATA BRASILIENSIS FIBER

4ENC - MECHANICAL, RHEOLOGICAL AND THERMAL EVALUATION OF COATING FILMS ADDITIVATED WITH LIGNIN AND CONVENTIONAL STABILIZERS

4ERB - CO-PYROLYSIS OF COCONUT FIBER AND MUNICIPAL SOLID WASTE: A SUSTAINABLE UTILIZATION